Designed for explosion-proof areas and flammable and explosive dust continuous operation or supporting industrial equipment
Keywords: Explosion-proof area and flammable and explosive dust continuous operation or industrial equipment matching
Product features: safe explosion-proof, light structure, economical and affordable
Power: 2.2kw-4.0kw 380V/50~60Hz
Maximum negative pressure: 290mbar
Filtration accuracy: 3um & 99.9%
Dust vibration method: manual rotation vibration dust cleaning
Explosion-proof motor, to eliminate the hidden danger of electrical sparks in the motor
The power system adopts the international advanced explosion-proof precision casting turbo fan (air pump), wide pressure and dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power is optional from 0.25kw-4.0kw, and the power supply is 380V/50Hz. Motor explosion-proof grade: ExdⅡBT4Gb.
Anti-static filter to eliminate the hidden danger of static sparks
In terms of filtration system, star bag and cartridge filters are optional.
The star bag filter adopts anti-static blended felt, and the conductivity is enhanced by adding binary fibers. The cartridge filter is treated with aluminized film on the surface, which has good anti-static performance, and the surface resistance is ≤105Ω.
Explosion-proof electrical box, to eliminate hidden dangers of electrical sparks
The control system uses an explosion-proof electric box, and the internal AC contactor and thermal overload use Schneider brand electrical components. Flameproof explosion-proof electric box, explosion-proof mark: Exd Ⅱ BT4.
Negative pressure monitoring, dust cleaning reminder
The negative pressure gauge is a standard configuration component of the whole machine. It is specially customized by Puhua Company for industrial vacuum cleaners. Green, blue, and red correspond to the internal negative pressure of the machine in each power segment. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.
Industrial casters, easy to move
Industrial casters are simple and convenient to install. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickled board to add reinforcement ribs. A single 2-inch caster wheel can carry 50kg. The wheel surface is designed with texture to enhance the anti-skid performance.
The upper and lower barrels are separated for easy dust removal
The separation structure of the upper and lower buckets is the standard configuration of this machine. The biggest convenience for users is the convenience of dust removal. When cleaning dust, you only need to lift the pressure bar, and the dust collection bucket will naturally fall to the ground. Drag the built-in casters The dust bucket dumps the dust, and when finished, press down the pressure lever.
Built-in cyclone separator to reduce the load on the filter
The built-in cyclone separator structure is the standard configuration of this machine. When it is installed at the connection with the dust suction port, large particles of dust particles can be directly settled in the lower dust bucket after passing through the cyclone separator. It does not need to be intercepted and collected by filters, and filters can be added service life.
Anti-static interface and hose
The vacuum hose and joints are made of anti-static material, the electrical conductivity meets the DIN53482 standard, and the surface resistance is <106Ω.
The filter cartridge is manually rotated and vibrated to remove dust, which is convenient and efficient
Rotary vibration dust cleaning adopts the manual dust vibration mode. You only need to rotate the rotary handle clockwise/counterclockwise for about 1 minute to clean the large particles of dust adhering to the surface of the filter cartridge.