Widely used in metal processing, plastic sheet processing, batteries, casting, electronics, 3D printing (clean production, dust control) and other occasions
Keywords: metal processing, plastic sheet processing, battery, casting, electronics, 3D printing (clean production, dust control)
Product features: stable, high-precision filter cartridge, manual lifting and cleaning
Power: 2.2kw-4.0kw
Maximum flow: 420 m3/h
Maximum negative pressure: 320 mbar
Filtration accuracy: 3um & 99.9%
Cleaning method: bag lifting and vibration dust cleaning
High-voltage power, continuous escort
The power system adopts the international advanced precision casting turbo blower (air pump), wide pressure and dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power is optional from 0.25kw-4.0kw, and the power supply can be single-phase 230V 50/60Hz, three-phase 220-240/345-415V 50Hz and 220-275/380-480V 60Hz, etc. Special voltage can be customized.
Classic structure, stable operation
In terms of the structure of the whole machine, the dust collection system and the power system are placed side by side. It is the most classic type of industrial vacuum cleaner. This structure runs smoothly and moves smoothly.
High-efficiency filtration, rejecting dust
In terms of filtration system, star-shaped bag is optional, and the star-shaped bag filter is made of polyester fiber needle-punched felt, which can be customized for specific working conditions. The star-shaped bag filter can be covered with a film to improve the filtration accuracy and prevent dust from passing through.
Cleaning system, efficient and reliable
The dust removal system adopts manual dust removal.
Built-in cyclone separator to reduce the load on the filter
The built-in cyclone separator structure is the standard configuration of this machine. When it is installed at the connection with the dust suction port, large particles of dust particles can be directly settled in the lower dust bucket after passing through the cyclone separator. It does not need to be intercepted and collected by filters, and filters can be added service life.
Stainless steel vacuum bucket, strong and durable
The vacuum bucket is all made of stainless steel, the wall of the bucket is smooth, easy to clean, strong corrosion resistance, durable. The vacuum bucket cover is formed by CNC spinning machine, which has a beautiful and elegant appearance, and prevents problems such as desoldering and cracks.
Negative pressure monitoring, dust cleaning reminder
Negative pressure gauge is a standard configuration component of the whole machine. It is specially customized by Puhua Company for industrial vacuum cleaners. The green, blue and red correspond to the internal negative pressure of the machine in each power segment, and the pointer points to the red area to indicate that the filter needs to be cleaned or replaced.
Industrial casters, easy to move
The installation of industrial casters is simple and convenient. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickled board to add reinforcement ribs. A single 2-inch caster wheel can carry 50kg. The wheel surface is designed with texture to enhance the anti-skid performance.
The upper and lower barrels are separated for easy dust removal
The separation structure of the upper and lower buckets is the standard configuration of this machine. The biggest convenience for users is the convenience of dust removal. When cleaning dust, you only need to lift the pressure bar, and the dust collection bucket will naturally fall to the ground. Drag the built-in casters The dust bucket dumps the dust, and when finished, press down the pressure lever.
Technical specification
