PGD Series Filter Cartridge Vibrating Industrial Vacuum Cleaner

Widely used in workshop cleaning, plastic sheet processing, batteries, casting, electronics, 3D printing (clean production, dust control) and other occasions
Key words: workshop cleaning, plastic sheet processing, battery, casting, electronics, 3D printing (clean production, dust control)
Product features: stable, high-precision filter cartridge, manual dust vibration
Power: 2.2kw-7.5kw
Maximum flow: 700 m3/h
Maximum negative pressure: 270 mbar
Filtration accuracy: 3um & 99.9%
Cleaning method: manual rotation vibration dust cleaning

High-voltage power, continuous escort

The power system adopts the international advanced precision casting turbo blower (air pump), wide pressure and dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power is optional from 0.25kw-4.0kw, and the power supply can be single-phase 230V 50/60Hz, three-phase 220-240/345-415V 50Hz and 220-275/380-480V 60Hz, etc. Special voltage can be customized.

The filter cartridge is manually rotated and vibrated to remove dust, which is convenient and efficient

Rotary vibration dust cleaning adopts manual vibration dust mode. You only need to rotate the rotary handle clockwise/counterclockwise for about 1 minute to clean the large particles of dust adhering to the surface of the filter cartridge.

High-efficiency filtration, rejecting dust

The filtration system adopts a built-in cyclone separator + filter cartridge filter, and the cyclone separator directly settles large particles of dust or water droplets in the lower collection barrel. Japan’s Toray polyester fiber substrate is treated with PTFE coating, and the equivalent diameter is 0.3 The dust filtration accuracy of µm is more than 99%, which meets the indoor emission standard, with small wind resistance and easy cleaning.

Built-in cyclone separator to reduce the load on the filter

The built-in cyclone separator structure is the standard configuration of this machine. When it is installed at the connection with the dust suction port, large particles of dust particles can be directly settled in the lower dust bucket after passing through the cyclone separator. It does not need to be intercepted and collected by filters, and filters can be added service life.

Stainless steel vacuum bucket, strong and durable

The vacuum bucket is all made of stainless steel, the wall of the bucket is smooth, easy to clean, strong corrosion resistance, durable. The vacuum bucket cover is formed by CNC spinning machine, which has a beautiful and elegant appearance, and prevents problems such as desoldering and cracks.

Negative pressure monitoring, dust cleaning reminder

Negative pressure gauge is a standard configuration component of the whole machine. It is specially customized by Puhua Company for industrial vacuum cleaners. The green, blue and red correspond to the internal negative pressure of the machine in each power segment, and the pointer points to the red area to indicate that the filter needs to be cleaned or replaced.

Industrial casters, easy to move

The installation of industrial casters is simple and convenient. The wheels are made of top-grade polyurethane (PU), and the bracket is made of 2.5mm pickled board to add reinforcement ribs. A single 2-inch caster wheel can carry 50kg. The wheel surface is designed with texture to enhance the anti-skid performance.

The upper and lower barrels are separated for easy dust removal

The separation structure of the upper and lower buckets is the standard configuration of this machine. The biggest convenience for users is the convenience of dust removal. When cleaning dust, you only need to lift the pressure bar, and the dust collection bucket will naturally fall to the ground. Drag the built-in casters The dust bucket dumps the dust, and when finished, press down the pressure lever.

Technical specification

Leave A Message For Us

Leave A Message For Us