A purifier specially designed for laser marking/engraving leather, acrylic, plastic, PVC and other non-metallic materials
Keywords: laser marking/engraving leather, acrylic, plastic, PVC and other non-metallic materials process design purifier
Product features: beautiful appearance, convenient operation, high cost performance
Power: 3800V/1500W 220V/1500W
Flow: 1800m3/h
Maximum negative pressure: 2000 Pa
Filtration accuracy: 0.3um & 99.9%
Number of suction ports: single port or double port
High-quality fan system, smooth and quiet operation
The power system adopts single-phase/three-phase asynchronous motor + special customized impeller, which has strong suction, large air volume and low noise. The single-phase motor adopts domestic famous brand, and the three-phase motor adopts Siemens brand motor. The wind wheel made of alloy material and the unique dynamic balance correction technology make the wind wheel run more smoothly and reliably, and the air suction volume is larger.
Control circuit, safe and reliable
The electrical system adopts the advanced modular circuit board specially designed by our company, which can realize the PWM stepless speed regulation function. The key components adopt imported brands and materials to fully guarantee the safety and reliability of operation. In addition, there will be an audible alarm function when a clogged filter is detected. Remind the user to clean the dust or replace the filter.
Multi-stage filtration, special activated carbon layer group, the first choice for odor dust
The filter system adopts polyester needle-punched felt bag filter with large filter area, and the filter can be cleaned and reused, which greatly reduces the use of consumables. It is the first choice for laser processing of non-metallic fume, especially for occasions with a large amount of fume. At the same time, it is equipped with HEPA high-efficiency filter and activated carbon filter as the secondary filter, which is especially used in the conditions that require deodorization. This product uses a special activated carbon filter customized by the manufacturer, and conducts special research on the iodine adsorption value, carbon tetrachloride (CTC) adsorption value, and methylene blue adsorption value of activated carbon. It is especially suitable for laser engraved leather, acrylic, kraft paper, PVC. Ammonia, hydrogen sulfide, carbon disulfide, methyl mercaptan, methyl sulfide, dimethyl disulfide, trimethylamine, styrene and VOC organic waste gas produced by non-metallic materials, the effect is remarkable.
Quick-release design, quick and easy filter replacement
The filter replacement method adopts a quick-release design. The operator only needs to unscrew the left and right two handles with handles to remove the filter for cleaning and replacement, which is convenient and quick, and ensures good air tightness.
Left and right air inlet, variable air outlet design
The air inlet adopts the left and right air inlet design, and customers can freely choose the left or right air inlet according to the different placement positions of the equipment, reducing the length of the pipe and unnecessary winding. The air outlet can choose a long standard air outlet with a muffler for direct indoor discharge, or you can choose to add a round air outlet to directly discharge through the pipe or connect to the central smoke exhaust system (special when confirming the order illustrate).
Technical specification
