Designed for very large amount of dust 24 hours non-stop work occasions
Key words: large amount of dust, automatic discharge
Product features: large amount of dust, automatic discharge
Power: 380V/1.5kw-7.5kw
Maximum flow: 1800-8000m3/h
Negative pressure: 1800-2400 Pa
Filtration accuracy: 0.3um & 99.9%
Dust mode: automatic pulse back blowing dust
Siemens Motor, continuous running
Thedynamical system adopts Siemens 380V three-phase asynchronous motor，configuration of special customized aluminum alloy impeller, the design of the perfect combination of negative pressure and flow, stable operation, low failure rate, low noise, can be 24 hours continuous running.
Cartridge filter, high filtration accuracy
The filter system is made of cartridge filter, Japan Toray polyester fiber base material. Standard configuration of polyester fiber oil and water resistant material, the equivalent filter diameter of more than 3 micron dust filter accuracy of 99%, also can choose higher filter precision filter cylinder material.
Specially set up ash cleaning outlet, no secondary pollution
The pneumatic pulse back blowing system consists of a cylinder, solenoid pulse valve, PLC controller, and compressed air. One end of the pulse valve is connected with a compressed air storage cylinder, and the other end is connected with a jet pipe. The valve cover is equipped with an exhaust valve, which is controlled by a pulse controller
When there is no signal issued by the pulse control instrument, the pulse solenoid valve to work, and the ash cleaning is completed in 0.1-0.3S each time. The high-pressure air emitted at this moment has a good ash cleaning effect. Air enters the filter cylinder at high flow rate, which makes the filter cylinder expand sharply and causes impact vibration, which makes the dust attached to the filter cylinder be shaken off, and the dust adsorbed on the surface of the filter material is shaken off to the dust collection bucket under the action of the air flow.
Electronic control system, quality assurance
In terms of electrical system, the main electronic control components is the international famous brand – French Schneider products. The motor is independent control of the electric box, built-in power main switch, thermal overload protection, phase-loss, polarity reversal phase sequence protection, user-friendly control panel, can easily realize remote control, linkage control and other functions.
Automatic unloading motor, 24 hours continuous running, non-stop running
Automatic unloading machine is equipped with star discharging valve, which is especially suitable for the occasion where the dust is particularly large and the dust collector needs to run continuously. Its work is stable and reliable, the discharging is uniform, and the sealing is good.
Industrial non – skid caster, top polyurethane material
Industrial moving casters are standard accessories of this machine. The wheels are made of top polyurethane (PU), the support is made of 2.5mm pickled plate to increase the reinforcement, and a single 4-inch caster can carry 150kg. The wheel surface is designed with grain to enhance the anti-slip performance.
Technical specification
