Keywords: laser processing, circuit board processing, metal processing machine tool
Product features: high negative pressure dust collector, turbine vacuum pump, low noise, electric dust vibration.
Power: 1.5kw-7.5kw 220V/380V
Flow rate: 210-900 m3/h
Maximum negative pressure: 400mbar
Filtration accuracy: 3um & 99.9%
Dust mode: artificial dust removal
High-voltage power, continuous escort
The power system adopts the international advanced precision casting turbo fan (air pump), wide pressure and dual frequency, high reliability, low noise, long life, and can work continuously for 24 hours. The power is optional from 0.25kw-15kw, the power supply can be single-phase 230V 50/60Hz, three-phase 220-240/345-415V 50Hz and 220-275/380-480V 60Hz, etc. Special voltage can be customized.
Cartridge filter, high filtration fineness
For the filtration system, the filter cartridge filter is selected, and the Japanese Toray polyester fiber substrate is used. The standard configuration is made of polyester fiber oil-proof and waterproof material, and the filtration accuracy of dust with an equivalent diameter of more than 3 microns is over 99%, and a higher filtration accuracy filter cartridge material is optional.
Specially set the dust removal door, no secondary pollution
The dust removal system adopts an electric vibration dust removal device.
The standard configuration of the dust removal on the surface of the filter cartridge of the DG-E series dust collector is an electric paddle dust vibration structure. The operator only needs to press the dust removal button, and the built-in dust removal motor will automatically run for dust removal.
Electrical system, quality assurance
In terms of electrical system, the main electronic control components adopt the international famous brand – French Schneider products. The turbine motor realizes the independent control of the electrical box, and has built-in thermal overload protection, phase loss, and reverse phase sequence protection. The control panel is simple and elegant, and can easily realize functions such as remote control and linkage control.
Negative pressure monitoring, dust cleaning reminder
Negative pressure gauge is a standard configuration component of the whole machine. It is specially customized by Puhua Company for industrial vacuum cleaners. Green, blue and red correspond to the internal negative pressure of the machine in each power segment. The pointer points to the red area to indicate that the filter needs to be cleaned or replaced.
Drawer type dust box, practical and convenient
The dust collection box adopts a drawer-type structure. When the dust is full, open the door panel, and the dust collection box can be pulled out to clean the dust, and then the dust collection box can be sent in after completion. Convenient, fast and practical.
Industrial casters, your choice
Industrial mobile casters are standard accessories for this machine. The wheels are made of top-grade polyurethane (PU), and the brackets are made of 2.5mm pickled boards to add reinforcements. A single 4-inch caster wheel can carry 150kg. The wheel surface is designed with texture to enhance the anti-skid performance.
Technical specification
